FabulaTech Forum - Support AT Commands

Nov 23^rd, 2024, 8:19am

Welcome, Guest. Please Login or Register.

FabulaTech Forum Serial Port Solutions Virtual Modem (Moderators: Andrew, Tim_GaliullinFT, Sergey_Jarovski) Support AT Commands

Previous topic | Next topic

Pages: 1

Notify of replies

Author

Topic: Support AT Commands (Read 5099 times)

Heibz
FabulaTech Forum Newbie

Posts: 1

Support AT Commands
on: Mar 20^th, 2013, 1:36pm

Quote

Modify

Is there a complete AT command set listing along with descriptions available from FabulaTech for VirtualModem ? Would be nice to know the exact commands that these virtual modems support.

Also, the virtual serial ports created by VirtualModem lack the standard COM port settings available in device manager that a REAL physical port has. FIFO, BAUD, Parity, StopBit, etc.

How can I get these options for the virtual serial ports created by VirtualModem ?

Undecided

IP Logged

Serge Frost
FabulaTech Forum Full Member

Gender:

Posts: 169

Re: Support AT Commands
Reply #1 on: Mar 21^st, 2013, 3:57am

Quote

Modify

Hello,

1. Unfortunately we don`t have a list of commands. But we support most of the standard commands.You will get "ERROR" text if you try to run the command that is not implemented.

2. "Virtual Modem" can`t change the settings of the virtual COM port. The program was developed to allow other software that opens the COM port(the program you use) to control these settings.

IP Logged

Pages: 1

Notify of replies


Previous topic \| Next topic