FabulaTech Forum
        (https://www.fabulatech.com/forum/board-usbovernetwork-action-display-num-140461640.html)
      

        USB Solutions >> USB over Network >> virtualpc 2007 + Hamster II Nitgen
        
(Message started by: fjrodriguez on Nov 23rd, 2008, 9:34am)
Title: virtualpc 2007 + Hamster II Nitgen
Post by fjrodriguez on Nov 23rd, 2008, 9:34am
I can't use a hamster ii finger print reader from a virtual pc machine.

I can connect to the host ok, and to the reader in the host ok, but when I press "capture" in the diagnostic tool, the reader is blocked with the red light fixed.

Host - Windows XP sp3
Guest - Windows XP sp3
Title: Re: virtualpc 2007 + Hamster II Nitgen
Post by Mike on Dec 5th, 2008, 6:11am
Hi,

Could you please try our the latest 3.6.3 version?

Awaiting your reply.
Thanks!
Title: Re: virtualpc 2007 + Hamster II Nitgen
Post by fjrodriguez on Dec 8th, 2008, 11:51am
same behaviour, not working
Title: Re: virtualpc 2007 + Hamster II Nitgen
Post by Mike on Dec 9th, 2008, 2:08am
Ok, let's check whether this problem occurs because of VirtualPC. Could you please try another PC instead of VirtualPC? If you don't have such a possibility, you can use one PC only. I mean you can install both UoN Server and Client on the same PC and make this test. Will it work?

Thanks!
Title: Re: virtualpc 2007 + Hamster II Nitgen
Post by fjrodriguez on Dec 9th, 2008, 2:21am
Tested on same pc, same behaviour. Until I stop sharing on server, the light is up and device is blocked.
Title: Re: virtualpc 2007 + Hamster II Nitgen
Post by Mike on Dec 9th, 2008, 2:48am
Well, it seems the only way to find out the solution to this problem is remote debugging. Please give me your e-mail address and I'll send you a brief description of how to make it by e-mail.

Thanks!