Max
FabulaTech Forum Newbie
Posts: 2
|
 |
Failed to activate the server on Ubuntu x64
on: May 18th, 2016, 10:54pm |
 Quote  Modify
|
Hi,
I always got the below error when trying to activate the usb over network server on my system (Ubuntu x64),
----------
pod@pod-linux-srvr:~$ sudo /opt/ftusbnet/sbin/ftusbnetd -k ~/pod/install/USB_over_Network_SN.txt
USB over Network version: 5.1
This software uses the libusb 1.0 library.
The components of libusb are distributed under the GNU General
Public License and the GNU LGPL. You can obtain updated versions
of libusb and the source code from the libusb homepage at
http://libusb.sourceforge.net.
Thre is no SSL key or certificate
Build time: Jul 17 2015 09:05:30
Trial expired.
Thank you for using this software!
----------
But when I specified an invalid key file, the output message changed.
---------
pod@pod-linux-srvr:~$ sudo /opt/ftusbnet/sbin/ftusbnetd -k ~/pod/install/USB_over_Network_SN___.txt
USB over Network version: 5.1
This software uses the libusb 1.0 library.
The components of libusb are distributed under the GNU General
Public License and the GNU LGPL. You can obtain updated versions
of libusb and the source code from the libusb homepage at
http://libusb.sourceforge.net.
Thre is no SSL key or certificate
Build time: Jul 17 2015 09:05:30
Cant' read license key: /home/pod/pod/install/USB_over_Network_SN___.txt
Trial: 14 day(s) left
Up to 1 devices supported
---------
When specified an invalid key file, the output showed " Trial: 14 day(s) left " but I got the below error when trying to start the service.
-------------
pod@pod-linux-srvr:~/ntfs/Install/Comn_tools/VMware$ sudo /opt/ftusbnet/sbin/ftusbnetd
USB over Network version: 5.1
This software uses the libusb 1.0 library.
The components of libusb are distributed under the GNU General
Public License and the GNU LGPL. You can obtain updated versions
of libusb and the source code from the libusb homepage at
http://libusb.sourceforge.net.
Thre is no SSL key or certificate
Build time: Jul 17 2015 09:05:30
Trial expired.
Thank you for using this software!
-------------
I copied the license key including the "BEGIN" and "END" lines and saved it to a file named "ftusbnet.key" then reran the command line but also failed. Even when the ftusbnet.key was copied to /etc the result was the same.
|
Home
Search
Members
Login
Register
Reply
Notify of replies
Print
Author
IP Logged
Posts: 559