FabulaTech Forum - How to install on XenServer 6.5

Apr 4^th, 2025, 7:55am

Welcome, Guest. Please Login or Register.

FabulaTech Forum USB Solutions USB over Network (Moderators: Tim_GaliullinFT, Sergey_Jarovski, Andrew) How to install on XenServer 6.5

Previous topic | Next topic

Pages: 1

Notify of replies

Author

Topic: How to install on XenServer 6.5 (Read 5182 times)

RNuser42722
FabulaTech Forum Newbie

Posts: 2

How to install on XenServer 6.5
on: May 2^nd, 2016, 3:49pm

Quote

Modify

I have windows VM, and whant to print documents on attached printer device through USB at XENServer 6.5. Is it Possible?
I type lsusb and there is no such command

IP Logged

Sergey_Jarovski
FabulaTech Forum Moderator
FabulaTech Forum God

Gender:

Posts: 559

Re: How to install on XenServer 6.5
Reply #1 on: May 4^th, 2016, 10:38am

Quote

Modify

Hi !
I would advise you to do the following:
- download the server part of USB over Network on your XenServer:
http://www.fabulatech.com/usb-over-network-linux-packages.html
- do all steps according to this instruction:
http://www.fabulatech.com/usb-over-network-linux-packages.html
- run ftusbnetd daemon:
http://www.fabulatech.com/usb-over-network-linux-server-help/quick-start.html
- share your usb printer:
http://www.fabulatech.com/usb-over-network-linux-server-help/command-line.html
- download and install the client part of USB over Network on your virtual Windows OS:
http://www.fabulatech.com/usb-over-network-download.html
- add the IP/NetBios name of USB over Network (server) on the client side:
http://www.fabulatech.com/usb-over-network-client-help/server-adding-manual.html
- connect your printer on the client side:
http://www.fabulatech.com/usb-over-network-client-help/device-connecting-manually.html
- install the driver for your printer on the USB over Network (client) side.

IP Logged

Sergey Jarovski

FabulaTech
===================
http://www.fabulatech.com

RNuser42722
FabulaTech Forum Newbie

Posts: 2

Re: How to install on XenServer 6.5
Reply #2 on: May 8^th, 2016, 3:18pm

Quote

Modify

Thank You very much.
What are prerequisites for ftusbnetd daemon to run?
What support from kernel is needed?
By default XenServer don't detect anything except usb disk.
Ronald

IP Logged

Sergey_Jarovski
FabulaTech Forum Moderator
FabulaTech Forum God

Gender:

Posts: 559

Re: How to install on XenServer 6.5
Reply #3 on: May 10^th, 2016, 4:55am

Quote

Modify

Hi
You can test the static build for your purpose (XenServer usage):
http://www.fabulatech.com/usb-over-network-linux-packages.html
http://www.fabulatech.com/usb-over-network-linux-packages/ftusbnet-5.1-static-i386.tar.gz
If you don't see the new devices via "./ftusbnetctl list" after plugging then you can use the following command for reread (see README for more):
sudo killall -HUP ftusbnetd

IP Logged

Sergey Jarovski

FabulaTech
===================
http://www.fabulatech.com

Pages: 1

Notify of replies


Previous topic \| Next topic