FabulaTech Forum - SPR & Windows 11 - Access Denied error at test

Jan 20^th, 2025, 11:19pm

Welcome, Guest. Please Login or Register.

FabulaTech Forum Serial Port Solutions Serial Port Redirector (Moderators: Andrew, Tim_GaliullinFT, Sergey_Jarovski) SPR & Windows 11 - Access Denied error at test

Previous topic | Next topic

Pages: 1

Notify of replies

Author

Topic: SPR & Windows 11 - Access Denied error at test (Read 1828 times)

bushman
FabulaTech Forum Newbie

Posts: 2

SPR & Windows 11 - Access Denied error at test
on: Sep 27^th, 2023, 1:19pm

Quote

Modify

We've set this up in the past without issue (can't be certain if the last system was W10 or W11) but we are encountering a persistent issue on the installation today:

SPR configures Com port fine and all visible in control panel with "device working properly" message.

But when testing using Putty we get access denied issue - the SPR panel shows "Connecting" during the access attempt. Added standard 9600 modem via lagacy hardware add with similar response in panel followed by config error from modem.

The logged in user IS admin, run as admin, changed port numbers, restarted etc. etc. to no change in status; any thoughts please?
Thanks

IP Logged

Tim_GaliullinFT
FabulaTech Forum Moderator
FabulaTech Forum Newbie

Posts: 17

Re: SPR & Windows 11 - Access Denied error at
Reply #1 on: Sep 28^th, 2023, 7:46am

Quote

Modify

Hello!

Our Serial Port Redirector is not supported by Windows 11 at this moment.

We are working on updates for our serial redirection products, and they will be released later this year.

IP Logged

bushman
FabulaTech Forum Newbie

Posts: 2

Re: SPR & Windows 11 - Access Denied error at
Reply #2 on: Sep 28^th, 2023, 8:22am

Quote

Modify

Hello Tim,
Thanks for reply and will await the W11 update in due course.

IP Logged

Pages: 1

Notify of replies


Previous topic \| Next topic