FabulaTech Forum - Problem Network simultaneous connect

Nov 21^st, 2024, 5:46pm

Welcome, Guest. Please Login or Register.

FabulaTech Forum Serial Port Solutions Network Serial Port Kit (Moderators: Sergey_Jarovski, Andrew, Tim_GaliullinFT) Problem Network simultaneous connect

Previous topic | Next topic

Pages: 1

Notify of replies

Author

Topic: Problem Network simultaneous connect (Read 4900 times)

matteo
FabulaTech Forum Newbie

Posts: 1

Problem Network simultaneous connect
on: Jul 28^th, 2005, 1:55am

Quote

Modify

I have unloaded the demo version ,
my problem is:
on the "server" where I have in share one serial port
(com1 phisical)
not accecpt simultaneous connections, but only one occupying the serial port

Is a restriction of the trial version ?
Is possible to have a simultaneous connections ?

Excuse me for my english
Many thanks in advance

Matteo

IP Logged

Andrew
FabulaTech Forum Moderator
Moderator
FabulaTech Forum Senior Member

Gender:

Posts: 427

Re: Problem Network simultaneous connect
Reply #1 on: Jul 28^th, 2005, 2:23am

Quote

Modify

Hello, Matteo.
We are working over this feature and it will be available in the next program version.

In any case I can propose you the following temporary solution:

1) Use our Serial Port Splitter to split Physical com1 to several virtual ports (e.g. com11, com12, com13, com14)

2) Use Network Serial Port Kit to share these ports (com11, com12, com13, com14)

3) On client side use Network Serial Port Kit and connect to needed shared com ports.

If this solution suits your needs, we can offer Serial Port Splitter for you for free.

IP Logged

Andrew Scott

FabulaTech
===================
http://www.fabulatech.com

Leaderaa
FabulaTech Forum Newbie

Posts: 1

Re: Problem Network simultaneous connect
Reply #2 on: May 25^th, 2007, 10:43pm

Quote

Modify

Hi,

I also have the same problem.. did a newer version of NSPK came out yet?

IP Logged

Andrew
FabulaTech Forum Moderator
Moderator
FabulaTech Forum Senior Member

Gender:

Posts: 427

Re: Problem Network simultaneous connect
Reply #3 on: May 29^th, 2007, 6:49am

Quote

Modify

Hi,
please use Serial Port Splitter with Network Serial Port Kit together (as I described before). Using Splitter, you can split COM port on server side to several COM ports. Then using Network Serial Port Kit on server side, you can share all these COM ports. Then you can connect to specified shared COM port from client side using Network Serial Port Kit.
If any issues with it, please let us know.
Thank you.

IP Logged

Andrew Scott

FabulaTech
===================
http://www.fabulatech.com

Pages: 1

Notify of replies


Previous topic \| Next topic