FabulaTech Forum - Connection broken and wont reconnect

Nov 21^st, 2024, 6:57pm

Welcome, Guest. Please Login or Register.

FabulaTech Forum Serial Port Solutions Network Serial Port Kit (Moderators: Sergey_Jarovski, Tim_GaliullinFT, Andrew) Connection broken and wont reconnect

Previous topic | Next topic

Pages: 1

Notify of replies

Author

Topic: Connection broken and wont reconnect (Read 5244 times)

Northcom
FabulaTech Forum Newbie

Posts: 2

Connection broken and wont reconnect
on: Oct 14^th, 2009, 12:45pm

Quote

Modify

I have installed the network serial port kit (V5.6.2)on a Windows 2003 server and an XP PC. I can get a connection to the shared port on the PC and map it to COm5 on the server using the PC's IP address or UNC name. �I am finding that when the PC is turned off and back on the connection doesnt re-establish itself ie.. "broken connection" on server Virtual port connection and "Awaiting connection" on the PC. �Is there any way to refresh or reconnect the connection between the machines? �The only way I found to recreate the connection was to reinstall the software at both ends and start again!!! �
Thanks in anticipation..

Last Edit: Oct 14^th, 2009, 12:45pm by Northcom

IP Logged

George_White
FabulaTech Forum Senior Member

Posts: 307

Re: Connection broken and wont reconnect
Reply #1 on: Oct 15^th, 2009, 12:34am

Quote

Modify

Steven,

Did you try Properties of the virtual port - Connection settings tab - checkbox "Autoreconnect when connection is broken"?

IP Logged

Northcom
FabulaTech Forum Newbie

Posts: 2

Re: Connection broken and wont reconnect
Reply #2 on: Oct 15^th, 2009, 2:22pm

Quote

Modify

Thanks for that.. I did try that but with no luck. However since I gave reinstalled the software it seems to be running properly. Thanks again

IP Logged

Pages: 1

Notify of replies


Previous topic \| Next topic